How To Use AeroPress

Get started with your AeroPress with a step-by-step guide on how to use it!

Step-by-step

1. Heat water to 185F (85C) using your kettle (if you don’t have a kettle, boiling is fine).
2. Pull Plunger (1) to separate entirely from Chamber (2)
3. Put Paper Filter (6) in Filter Cap (3) and twist Filter Cap onto Chamber.
   4.Stand Chamber on AeroPress Carafe () and add 2 heaping Scoops (4) of storebought, medium ground coffee. Ifyou are making one cup of
   coffee, just cut your portion in half.
4. Shoke 8ently to level coffe. Pour water up to #8 marked on the side of the Chamber. For one cup, fi to the number4.You willsee some
   coffee drip through into the carafe. This is normal and is part of the process
5. Stir senty for 3 seconds. Quickly insert Punger about inch into Chamber,then pullup slightly to create a vacuum to stop drip-through. Woit
   60 seconds
6. Begin to press the plunger, appyin8 8entle constont pressure (do not push too hord) until you hear the roar or hisin8 sound as the air pushes
   the last bit of brew through the coffee bed
7. Remove Filter Cap and place aside. Position AeroPress over sink or garbase bin and push the Plunger the rest of the way through the chamber
   until you hear the Pop as the coffee bed “puck” pops out.
8. Remove Paper Flter from Fiter Cop and rinse. Hold the AeroPress under fresh water and rinse the sllicone plunser end and then store in the
   AeroPress Organizer Stand. Clean with sentle soap and a entle cloth every week to preserve the life of your AeroPress
9. Prepare yourself for the uniquely smooth, rich, full-bodied flavor of an AeroPress 3 in 1 Brew.